How to mount a towel bar on drywall

How to mount a towel bar on drywall

Bathroom DIY Projects DIY Drywall How-to

Mounting a towel bar on drywall can be a straightforward DIY project that enhances the functionality and aesthetics of your bathroom. This guide will walk you through the steps to securely mount a towel bar on drywall, ensuring it stays in place. We'll also address common questions related to this task.

Why Mount a Towel Bar on Drywall?

Mounting a towel bar provides a convenient place to hang towels, helping them dry properly and keeping your bathroom organized. Proper installation on drywall is essential to ensure the towel bar remains secure and can hold the weight of wet towels without falling.

Tools and Materials Needed:

  • Walabot stud finder
  • Measuring tape
  • Level
  • Pencil
  • Drill and drill bits
  • Screws
  • Wall anchors (if not mounting on studs)
  • Screwdriver
  • Adhesive (optional, for extra security)

Step-by-Step Guide to Mounting a Towel Bar on Drywall

Preparation:

  1. Choosing the Right Location:
    • Select a convenient and accessible spot, typically near the shower or bathtub. Ensure the height is comfortable for all users.
  2. Using a Walabot Stud Finder:
    • Turn on the Walabot stud finder and calibrate it against a section of the wall without studs.
    • Move the stud finder horizontally across the wall to locate studs. Mark these locations with a pencil.

Installation Process:

  1. Marking the Mounting Spots:
    • Hold the towel bar against the wall at the desired height. Use a level to ensure it is straight, and mark the positions where the mounting brackets will go. If no studs are located, mark the spots between the studs and plan to use wall anchors.
  2. Drilling Pilot Holes:
    • Drill small pilot holes at the marked spots. If you are mounting directly into studs, use a smaller drill bit. If you are using wall anchors, drill holes slightly larger than the anchor size.
  3. Inserting Wall Anchors:
    • If you are not mounting on studs, insert wall anchors into the pilot holes. Tap them gently with a hammer until they are flush with the wall.
  4. Attaching the Mounting Brackets:
    • Secure the mounting brackets to the wall using screws. Ensure they are firmly attached to either the studs or the wall anchors.
  5. Mounting the Towel Bar:
    • Attach the towel bar to the mounting brackets. Ensure it is secure and level.

Final Touches:

  1. Ensuring Stability:
    • Check that the towel bar is firmly in place. Apply gentle pressure to ensure it doesn't move.
  2. Adding Adhesive (Optional):
    • For extra security, apply a small amount of adhesive behind the mounting brackets before securing them to the wall.

FAQ Section

Can I mount a towel bar on drywall? Yes, you can mount a towel bar on drywall. It's important to use wall anchors if you're not mounting on studs to ensure the towel bar stays securely in place.

What is the best adhesive for towel racks on drywall? A strong construction adhesive, such as Liquid Nails or Gorilla Glue, can provide additional support for towel racks on drywall. Apply a small amount behind the mounting brackets for extra security.

Do towel bars need to be installed in studs? While it's ideal to mount towel bars on studs for maximum stability, you can use wall anchors to mount them securely on drywall if no studs are available.

How do I keep my towel bar from falling off the wall? To prevent a towel bar from falling off the wall, ensure you use appropriate wall anchors if not mounting on studs. Additionally, make sure the mounting brackets are securely attached and consider using adhesive for extra stability.


Mounting a towel bar on drywall is a simple yet effective way to enhance your bathroom's functionality. By following these steps and using reliable tools like the Walabot stud finder, you can ensure a secure and professional installation. For more DIY tools and guides, visit Walabot's website.

Back to blog