Welcome to Walabot DIY What’s The Drill Series

Click on your device to learn how to set it up

Walabot DIY

Walabot DIY Plus

Walabot DIY PLUS X

Change Device

1

Walabot DIY PLUS X

How to set up your Walabot

How to set up your Walabot

Just follow these 3 quick steps:

  • Install the app.
  • Connect the Walabot to your phone using the cable provided.
  • Start seeing into your wall.

2

Walabot DIY PLUS X

How to set up your Walabot

How to calibrate your Walabot

  • Place the flat side of the Walabot firmly against drywall.
  • Press ‘Calibrate’ (while holding the Walabot on the wall).
  • Press ‘Start calibration’ and move the Walabot in wide circular motions.
  • Remember to repeat this process if you start work on another wall.

3

Walabot DIY PLUS X

How to set up your Walabot

Find studs and stud centers

  • Calibrate before searching for studs in drywall.
  • Select Images Mode, and move the Walabot over the wall. When it finds a stud you’ll see a graphical representation on your phone.
  • To find the stud center, move the Walabot slowly over the stud. A Stud Center Indication will be shown when you’re right over the center.

Now that you have the basics covered, see what projects you can do

Have Questions? Need More Help?

Contact us at [email protected]

Don't have a Walabot? Get it now >>